Art. no.: 5173
TT-S1 is a control board for use when you need to control larger loads with a TTC2000. TT-S1 is used to control a contactor that activates and deactivates a basic heating load. For best function the load connected to TT-S1 should be of equal size to the load connected to the TTC2000. TT-S1 and TTC2000 must have separate loads.
Easy to install
The TTC2000 is prepared to plug-in the TT-S1 module. TTC2000 detects if a TT-S1 is installed and automatically adapts the control function accordingly. No settings are necessary. Connect in series with the control voltage for the heating load contactor. The supply should be wired via the fan stat, the high temperature limit switch etc. TTC2000 and TT-S1 must have separate, equal-sized loads.
| Ambient and duct temperature | ||
|---|---|---|
| Control signal | Supplied by the connector (TTC2000) |
| Dimensions and weights | ||
|---|---|---|
| Weight | 0.1 | kg |
| Others | ||
|---|---|---|
| Contact | max. 250V/2A |
| Document filename | Document filetype | |
|---|---|---|
| TT-S1_A_IMO_SE_GB.pdf | Manual | |
| TT-S1_gb.pdf | Manual | |
| EC_TT-S1.pdf | Declaration |
